IMMERSIVE AUGMENTED REALITY APPLICATIONS IN JAW AND KNEE REPLACEMENT SURGERY: ACCURACY AND PROCESSING TIME RESULTS

Authors

  • Shahad A. Salah Duhok Technical Institute, Duhok Polytechnic University, Duhok, Kurdistan Region, Iraq.
  • Ali A. Albabawat Faculty of Science, University of Duhok, Duhok, Kurdistan Region, Iraq
  • Lamya A. Omer Faculty of Science, University of Duhok, Duhok, Kurdistan Region, Iraq
  • Razwan M. Salah Faculty of Science, University of Duhok, Duhok, Kurdistan Region, Iraq
  • Mohammed H. Sadiq Faculty of Science, University of Duhok, Duhok, Kurdistan Region, Iraq

DOI:

https://doi.org/10.25271/sjuoz.2024.12.2.1159

Keywords:

augmented reality, surgery, 2d/3d image registration, image segmentation, 2d/3d matching

Abstract

 In medicine and healthcare, augmented reality (AR) has been used by physicians during surgical procedures. It has proved
helpful in preoperative planning and procedure navigation by allowing them to display in-depth information and visualize
details in real time during surgery, prioritizing patient safety and healthcare. Due to the critical nature of surgical procedures,
extreme accuracy is required when using ar technology to maintain patients' health. A few years ago, ar faced several
challenges and limitations in surgeries, such as noise in real-time images, cutting errors, navigation errors, wrong implant
placement, overlay errors, navigating narrow areas, geometric accuracy limitations, image alignment, image registration,
and occlusion handling. This paper reviews several recently published articles exploring ar technology usage in jaw and
knee replacement surgery, focusing on identifying the newest technologies, methods, and solutions for the abovementioned
limitations. Based on data collected from the published papers, the results were compared for each problem solved in each
article regarding accuracy and processing time.

References

Siff, L. N., & Mehta, N. (2018). An interactive holographic curriculum for urogynecologic surgery. Obstetrics & Gynecology, 132, 27S-32S.

Logishetty, K., Western, L., Morgan, R., Iranpour, F., Cobb, J. P., & Auvinet, E. (2019). Can an augmented reality headset improve accuracy of acetabular cup orientation in simulated THA? A randomized trial. Clinical Orthopaedics and Related Research, 477(5), 1190.

Al Janabi, H. F., Aydin, A., Palaneer, S., Macchione, N., Al-Jabir, A., Khan, M. S., ... & Ahmed, K. (2020). Effectiveness of the HoloLens mixed-reality headset in minimally invasive surgery: a simulation-based feasibility study. Surgical Endoscopy, 34, 1143-1149.

Rochlen, L. R., Levine, R., & Tait, A. R. (2017). First person point of view augmented reality for central line insertion training: A usability and feasibility study. Simulation in healthcare: Journal of the Society for Simulation in Healthcare, 12(1), 57.

Borgmann, H., Rodríguez Socarrás, M., Salem, J., Tsaur, I., Gomez Rivas, J., Barret, E., & Tortolero, L. (2017). Feasibility and safety of augmented reality-assisted urological surgery using smartglass. World journal of urology, 35(6), 967-972.

Andersen, D., Popescu, V., Cabrera, M. E., Shanghavi, A., Gomez, G., Marley, S., ... & Wachs, J. P. (2016). Medical telementoring using an augmented reality transparent display. Surgery, 159(6), 1646-1653.

Bourdel, N., Collins, T., Pizarro, D., Bartoli, A., Da Ines, D., Perreira, B., & Canis, M. (2017). Augmented reality in gynecologic surgery: evaluation of potential benefits for myomectomy in an experimental uterine model. Surgical endoscopy, 31, 456-461.

Fida, B., Cutolo, F., di Franco, G., Ferrari, M., & Ferrari, V. (2018). Augmented reality in open surgery. Updates in surgery, 70(3), 389-400.

Ayoub, A., & Pulijala, Y. (2019). The application of virtual reality and augmented reality in Oral & Maxillofacial Surgery. BMC Oral Health, 19, 1-8.

Halabi, O., Balakrishnan, S., Dakua, S. P., Navab, N., & Warfa, M. (2020). Virtual and augmented reality in surgery. The disruptive fourth industrial revolution: technology, society and beyond, 257-285.

Joda, T., Gallucci, G. O., Wismeijer, D., & Zitzmann, N. U. (2019). Augmented and virtual reality in dental medicine: A systematic review. Computers in biology and medicine, 108, 93-100..

Farronato, M., Maspero, C., Lanteri, V., Fama, A., Ferrati, F., Pettenuzzo, A., & Farronato, D. (2019). Current state of the art in the use of augmented reality in dentistry: A systematic review of the literature. BMC Oral Health, 19(1), 1-15.

Towers, A., Field, J., Stokes, C., Maddock, S., & Martin, N. (2019). A scoping review of the use and application of virtual reality in pre-clinical dental education. British dental journal, 226(5), 358-366.

Suenaga, H., Tran, H. H., Liao, H., Masamune, K., Dohi, T., Hoshi, K., & Takato, T. (2015). Vision-based markerless registration using stereo vision and an augmented reality surgical navigation system: a pilot study. BMC medical imaging, 15(1), 1-11.

Suenaga, H., Hoang Tran, H., Liao, H., Masamune, K., Dohi, T., Hoshi, K., ... & Takato, T. (2013). Real-time in situ three-dimensional integral videography and surgical navigation using augmented reality: a pilot study. International journal of oral science, 5(2), 98-102.

Murugesan, Y. P., Alsadoon, A., Manoranjan, P., & Prasad, P. W. C. (2018). A novel rotational matrix and translation vector algorithm: geometric accuracy for augmented reality in oral and maxillofacial surgeries. The international journal of medical robotics and computer assisted surgery, 14(3), e1889.

Tanji, A., Nagura, T., Iwamoto, T., Matsumura, N., Nakamura, M., Matsumoto, M., & Sato, K. (2022). Total elbow arthroplasty using an augmented reality–assisted surgical technique. Journal of Shoulder and Elbow Surgery, 31(1), 175-184.

Bin, S., Masood, S., & Jung, Y. (2020). Virtual and augmented reality in medicine. In Biomedical information technology (pp. 673-686). Academic Press.

Sielhorst, T., Feuerstein, M., & Navab, N. (2008). Advanced medical displays: A literature review of augmented reality. Journal of Display Technology, 4(4), 451-467.

Bosc, R., Fitoussi, A., Hersant, B., Dao, T. H., & Meningaud, J. P. (2019). Intraoperative augmented reality with heads-up displays in maxillofacial surgery: a systematic review of the literature and a classification of relevant technologies. International journal of oral and maxillofacial surgery, 48(1), 132-139.

Wang, J., Shen, Y., & Yang, S. (2019). A practical marker-less image registration method for augmented reality oral and maxillofacial surgery. International journal of computer assisted radiology and surgery, 14, 763-773.

Carpinello, A., Vezzetti, E., Ramieri, G., Moos, S., Novaresio, A., Zavattero, E., & Borbon, C. (2021). Evaluation of hmds by qfd for augmented reality applications in the maxillofacial surgery domain. Applied Sciences, 11(22), 11053.

Pellegrino, G., Mangano, C., Mangano, R., Ferri, A., Taraschi, V., & Marchetti, C. (2019). Augmented reality for dental implantology: a pilot clinical report of two cases. BMC Oral Health, 19(1), 1-8.

Kivovics, M., Takács, A., Pénzes, D., Németh, O., & Mijiritsky, E. (2022). Accuracy of dental implant placement using augmented reality-based navigation, static computer assisted implant surgery, and the free-hand method: an in vitro study. Journal of Dentistry, 119, 104070.

Tsukada, S., Ogawa, H., Nishino, M., Kurosaka, K., & Hirasawa, N. (2019). Augmented reality-based navigation system applied to tibial bone resection in total knee arthroplasty. Journal of Experimental Orthopaedics, 6(1), 1-7.

Goh, G. S., Lohre, R., Parvizi, J., & Goel, D. P. (2021). Virtual and augmented reality for surgical training and simulation in knee arthroplasty. Archives of Orthopaedic and Trauma Surgery, 141, 2303-2312.

Shrestha, L., Alsadoon, A., Prasad, P. W. C., AlSallami, N., & Haddad, S. (2021). Augmented reality for dental implant surgery: enhanced ICP. The Journal of Supercomputing, 77, 1152-1176.

Basnet, B. R., Alsadoon, A., Withana, C., Deva, A., & Paul, M. (2018). A novel noise filtered and occlusion removal: navigational accuracy in augmented reality-based constructive jaw surgery. Oral and maxillofacial surgery, 22, 385-401.

Budhathoki, S., Alsadoon, A., Prasad, P. W. C., Haddad, S., & Maag, A. (2020). Augmented reality for narrow area navigation in jaw surgery: Modified tracking by detection volume subtraction algorithm. The International Journal of Medical Robotics and Computer Assisted Surgery, 16(3), e2097.

Bayrak, M., Alsadoon, A., Prasad, P. W. C., Venkata, H. S., Ali, R. S., & Haddad, S. (2020). A novel rotation invariant and Manhattan metric–based pose refinement: Augmented reality–based oral and maxillofacial surgery. The International Journal of Medical Robotics and Computer Assisted Surgery, 16(3), e2077.

Manohar, S., Alsadoon, A., Prasa, P. W. C., Salah, R. M., Maag, A., & Murugesan, Y. (2020, November). A Novel Augmented Reality Approach in Oral and Maxillofacial Surgery: Super-Imposition Based on Modified Rigid and Non-Rigid Iterative Closest Point. In 2020 5th International Conference on Innovative Technologies in Intelligent Systems and Industrial Applications (CITISIA) (pp. 1-10). IEEE.

Pokhrel, S., Alsadoon, A., Prasad, P. W. C., & Paul, M. (2019). A novel augmented reality (AR) scheme for knee replacement surgery by considering cutting error accuracy. The international journal of medical robotics and computer assisted surgery, 15(1), e1958.

Maharjan, N., Alsadoon, A., Prasad, P. W. C., Abdullah, S., & Rashid, T. A. (2021). A novel visualization system of using augmented reality in knee replacement surgery: Enhanced bidirectional maximum correntropy algorithm. The International Journal of Medical Robotics and Computer Assisted Surgery, 17(3), e2223.

Downloads

Published

2024-05-13

How to Cite

Salah, S. A., Albabawat, A. A., Omer, L. A., Salah, R. M., & Sadiq, M. H. (2024). IMMERSIVE AUGMENTED REALITY APPLICATIONS IN JAW AND KNEE REPLACEMENT SURGERY: ACCURACY AND PROCESSING TIME RESULTS. Science Journal of University of Zakho, 12(2), 169–175. https://doi.org/10.25271/sjuoz.2024.12.2.1159

Issue

Vol. 12 No. 2 (2024): April-June issue

Section

Science Journal of University of Zakho

License

Copyright (c) 2024 Ali Abas Albabawat, Shahad Ahmed Salah, Mohammed Hikmat Sadiq, Razwan Mohmed Salah, Lamya A. Omer

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License [CC BY-NC-SA 4.0] that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work, with an acknowledgment of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online.